China 25w termination load DC-3GHz,N-M,25w termination load DC-3GHz,N-M Manufacturers

Related Products

5W RF Load 3G DIN Male Termination Load

DC-3GHz DIN Male RF Termination Load is in low VSWR

698-2700MHz DIN-Female 100W Low PIM Dummy RF Load Termination

698-2700MHz RF Load is Widely used for In-building Solutions with High power and Low PIM

DC-3GHz 2W RF Termination Load N Male Connector

DC-3GHz 2W RF Termination Load,which is widely used for In-building Solutions

DIN Male 2W DC-3GHz RF Termination Load Low VSWR RF Load

DC-3GHz RF Termination is in high quality and durable life.

2W Termination Load DC-3GHz with 4.3-10 Male Connector

2W RF Termination Load (DC-3GHz,4.3-10 male),which is in low VSWR

DC-3GHz 5W RF Termination N Male RF Load with Low VSWR

DC-3GHz 5W RF Termination with N Male Connector is widely used for In-building Solutions.

DC-3GHz 5W RF Termination Load with 4.3-10 Male RF Load

5W RF Termination Load is widely used for In-building Solutions.It's in low VSWR

DC-3GHz 10W RF Dummy Load Low VSWR Termination

10W RF Termination Load is widely used for In-building Solutions

DC-3GHz 25W RF Termination Load with N Male Connector RF Load

DC-3GHz 25W RF Termination is widely used for IBS,which is in good quality and attractive price.

DC-3GHz Termination 50W RF Load Low VSWR with N 4.3-10 DIN Connector

RF Termination manily absorbs all the microwave energy from the transmission line

100W RF Termination Load DC-3Ghz Load with N 4.3-10 DIN Connector

DC-3GHz 100W Load is widely used for IBS DAS

200W DC-3GHz RF Termination Load with N 4.3-10 DIN Connector

DC-3GHz RF Termination Load is can handle to 200W Power

DC-3GHz 300W Termination with N 4.-10 DIN Connector

Maniron's RF Terminations are offered with various power,frequency range

617-2700MHz 10W RF Termination Load Low PIM 161dBc NEX10

617-2700MHz NEX10 male 10W RF Load is widely used in DAS/IBS with low PIM-161dBc

10W 4G SMA 50ohm RF Termination Load

10W DC-4GHz Low VSWR SMA-Male Connector RF Dummy Load Termination RF Passive Components

RF DC-6GHz Low VSWR N-Female Connector RF Dummy Load

DC-6GHz 2W RF Termination Load,which is widely used for In-building Solutions

RF Dummy Load Low PIM 698-3800MHz Load Termination

698-3800MHz 50W Low VSWR -160dBc Low PIM RF Dummy Load

698-3800MHz 4.3-10 Female 50W RF Load is widely used in DAS/IBS with low PIM-160dBc

10W NEX10 Low PIM Dummy Load

10W LOW PIM Termination Load (617-2700Hz, NEX 10-male, -160dBc )

2W RF Dummy Load DC-3GHz Low VSWR QMA Male Connector

DC-3GHz 2W RF Termination Load,which is widely used for In-building Solutions

10W DC-6G RF Termination Load SMA Male Connector

DC-6GHz 10W RF Termination Load,which is widely used for In-building Solutions

698-2700MHz 100W Low PIM Load 4.3-10 female

698-2700MHz 100W RF Terminaiton Load 4.3-10 female connector

617-2700MHz Low pim 10W Nex10 termination load for In building solutions

10W nex10 termination load,617-2700MHz,Low PIM for telecommunication

New design DC-3GHz 100W N-Male RF Dummy Load/Termination

100W N-Male RF Dummy Load is a high power with wide frequency band DC-3GHz.

2W RF Dummy Load temination with Nex10-Male

Nex10 Male 2W Dummy temination Load

DC-6GHz 2W RF Termination Loads are often used by in-building passive, active DAS and Small Cell systems.

DC-3GHz Low pim 50W 4.3-10 male termination load for In building solutions

50W Low PIM termination load,DC-3GHz for IBS,BTS,DAS

factory 10w DC-6GHz 4.3-10 type dummy load termination

DC-6GHz 10W RF Termination Load,which is widely used for In-building Solutions

50ohm 200W DC-4G RF Termination Load with DIN Male

Termination loads are connected as a load to an open signal output or an RF line in order to avoid reflection. They are available with an impedance of 50 Ohms.

200W Low PIM Termination Load 698-2700MHz

200W DAS IBS RF Dummy Load Termination Load 698-2700MHz DIN-Male Connector IP65 Low PIM

50w DC-6GHz Dummy Load Terminator NJ

50W RF terminator,dummy load .DC to 6000MHz N male or female all available. Factory supply,OEM is welcome.

50ohm 100W DC-4GHz RF dummy Load with 7/16 DIN Male

100w 4Ghz Termination loads are connected as a load to an open signal output or an RF line in order to avoid reflection. They are available with an impedance of 50 Ohms.

5W DC-6GHz N male type Plug type RF termination Load without thread

5W DC-6GHz N male type Plug type RF termination is mainly used for rapid and precise measurement of coaxial system

50ohm 200W DC-3G RF Termination Load with 4.3-10 Male connenctor

Termination loads are connected as a load to an open signal output or an RF line in order to avoid reflection. They are available with an impedance of 50 Ohms.

DC-4GHz 25W N-Male Termination Dummy Load

DC-4GHz 25W RF Termination is widely used for IBS,which is in good quality and attractive price.

10W 4G RF Termination Load with 7/16 male Connector

DC-4GHz 10W RF Termination Load,which is widely used for In-building Solutions

double connector load DIN male to DIN female

40W 698-2700MHz Termination Load

Termination Load (40W, 698-2700MHz, DIN M-F, -160dBc)

200W 4GHz RF Tcoaxial dummy Load with 7/16 DIN male Connector

DC-4GHz 200W RF dummy Load,which is widely used for In-building Solutions

rf Low pim 10W Nex10 dummy load 698-2700MHz for In building solutions

10W nex10 termination load,698-2700MHz,Low PIM for telecommunication

0-7500MHz 2W Dummy temination Load with 4.3-10 Connector

10W 698-3000MHz Termination Load

Termination Load (10W, 698-3000MHz,4.3-10 Male, -161dBc)

10w DC-6GHz coaxial dummy load with 4.3-10 connector

Wide frequency band 10W DC-6GHz coaxial dummy Load,which is widely used for In-building Solutions

Customized Style 50W Low PIM Termination Load 4310-F

50W Low PIM Termination Load (600-2700MHz, -155dBc, 4.3/10-female,IP67) ◆ Wide Frequency Band 600-2700MHz ◆ 2G/3G/4G/LTE Coverage ◆ Low VSWR ◆ Low Passive Intermodulation -155dBc ◆ Widely used for Indoor and outdoor Solutions

DC-6GHz 20w termination load with 4.3-10-M

20W Termination Load covers frequency from DC to 6000MHz.It is Widely used for indoor and outdoor Solutions

DC-3GHz 200W dummy Load with 7/16 DIN male Connector

DC-3GHz 200W RF dummy Load,which is widely used for In-building Solutions

600-2700MHz Low PIM 50W RF Dummy Load

50W Low PIM RF Load Termination covers from frequency 600 to 2700MHz,which is in low VSWR

DC-3GHz 100W N-Male Termination load Square

100W N-Male RF Dummy Load is a high power with wide frequency band DC-3GHz.

100W DC-3GHz RF termination Load with 7/16 DIN Male

100w 3Ghz Termination load is connected as a load to an open signal output or an RF line in order to avoid reflection. They are available with an impedance of 50 Ohms.

20w DC-6GHz coaxial dummy load with 7/16 DIN Male connector

Wide frequency band 20W DC-6GHz coaxial dummy Load,which is widely used for In-building Solutions

698-2700MHz Low pim 100W 7/16 DIN female termination load

100W Low PIM termination load,698-2700Hz for IBS,BTS,DAS Maniron low PIM termination loads cover different frequency ranges from DC to 6000 MHz, while delivering high power performance of up from 1 to 1000Watts. This load has excellent return loss performance. The unit is ideal for optimizing RF power distribution, which is often required for distributed antenna systems (DAS).

Low pim 100W dummy load 600-6000MHz

100W Low PIM termination load,600-6000Hz for IBS,BTS,DAS Maniron low PIM termination loads cover different frequency ranges upto 6000 MHz, This load has excellent return loss performance. The unit is ideal for optimizing RF power distribution, which is often required for distributed antenna systems (DAS).

DC-3Ghz 100W RF Termination Dummy Load With N-Male Connector

This termination operates from DC to 3 GHz,which is matched to 50 ohms and can handle up to 100 Watts of power. It has low VSWR and 50 Ohm. Maniron has different styles to meet your requirements,please don’t hesitate to contact us if you are interested in.

Model No.	MNT-25-3G-NM
Frequency	DC-3000 MHz
VSWR	≤1.25
Impedance	50Ω
Average Power(W)	25W
Connectors type	N-Male
Operating temperature range	-30°C to +65°C
Applications	IP60
Color	Black
Packing	1Pce in box

25w termination load DC-3GHz,N-M

340-6000MHz 100W Low PIM Termination Load -161dBc

Best Selling DC-3800MHz, 4.3-10-M, 5W Termination Load