Product Name
Base Station Antenna 8 Ports 698~960MHz/1710~2690MHz 65°/65° 16/18dBi 2°~12°/2°~12° Integrated RCU Antenna
Product Features
◆ Includes 2 cross polarization arrays(4ports) for low band(698-960MHz) and 2 cross polarization arrays(4ports) for high band(1710-2690MHz)
◆ Uses the 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
◆ Single integrated and field replaceable RCU provide up to 5 RETs for independent electrical tilt control for each array. Compliant with AISG/3GPP
Technical Specifications
Frequency Range(MHz) |
R1/R2: 698-960 |
|||
|
698-806 |
790-862 |
824-894 |
880-960 |
Polarization |
±45° |
|||
Gain at mid tilt (dBi) |
15.0 |
15.5 |
15.8 |
16.0 |
Gain over all tilts (dBi) |
14.8±0.6 |
15.3±0.6 |
15.6±0.3 |
15.8±0.6 |
Horizontal 3dB beamwidth (°) |
69±5 |
66±5 |
64±4 |
62±4 |
Vertical 3dB beamwidth (°) |
11±0.8 |
10.2±0.7 |
9.5±0.6 |
9±0.7 |
Front-to-back ratio (dB) Total power, ±30° |
>22 |
>23 |
>24 |
>25 |
Cross-polar ratio (dB) (at Boresight) |
>17 |
>20 |
>21 |
>20 |
Electrical downtilt (°) |
2~12 |
|||
Sidelobe suppression (dB) (First sidelobe above main beam) |
>16 |
>16 |
>16 |
>16 |
VSWR |
<1.5 |
|||
Isolation: intra-system (dB) |
≥27 |
|||
Isolation: inter-system (dB) |
R1//R2 ≥ 25 R1, R2//(Y1, Y2) ≥ 28 |
|||
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|||
Impedance (Ω) |
50 |
|||
Max. Power per Input(W)@50℃ |
400 |
|||
Lightning Protection |
DC Ground |
Frequency Range(MHz) |
Y1/Y2: 1710-2690 |
|||
|
1710-1920 |
1920-2200 |
2200-2490 |
2490-2690 |
Polarization |
±45° |
|||
Gain at mid tilt (dBi) |
16.9 |
17.3 |
17.8 |
18.0 |
Gain over all tilts (dBi) |
16.7±0.5 |
17.1±0.5 |
17.5±0.5 |
17.8±0.5 |
Horizontal 3dB beamwidth (°) |
68±6 |
66±5 |
64±5 |
59±5 |
Vertical 3dB beamwidth (°) |
6.5±0.4 |
5.4±0.5 |
4.7±0.4 |
4.3±0.4 |
Front-to-back ratio (dB) Total power, ±30° |
>25 |
>25 |
>25 |
>25 |
Cross-polar ratio (dB) (at Boresight) |
>17 |
>18 |
>17 |
>16 |
Electrical downtilt (°) |
2~12 |
|||
Sidelobe suppression (dB) (First sidelobe above main beam) |
>16 |
>16 |
>16 |
>16 |
VSWR |
<1.5 |
|||
Isolation: intra-system (dB) |
≥25 |
|||
Isolation: inter-system (dB) |
≥28 |
|||
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|||
Impedance (Ω) |
50 |
|||
Max. Power per Input(W)@50℃ |
200 |
|||
Lightning Protection |
DC Ground |
Mechanical Specifications
Connector |
8×4.3-10-Female |
Connector Position |
Bottom |
Height×width×depth (mm) |
2080×446×165 |
Packing Size (mm) |
2370×510×215 |
Antenna weight (kg) |
30.6 |
Installation Kit Weight (kg) |
5.5 |
Packing Weight (kg) |
43.4 |
Wind load (N, at 150km/h) Frontal/Lateral/Rear |
1065/278/1190 |
Max. Wind Velocity (km/h) |
216 |
Radome Material |
Fiberglass |
Radome Color |
Gray |
Mechanical tilt (°) |
0~10 |
Operating Temperature (°C) |
-50~65 |
Mounting Hardware (mm) |
Ф50~Ф115 |
Integrated RET Properties
RET model |
MRCU-MQ10P2 |
RET type |
Integrated (Replaceable) |
RET protocol |
AISG 2.0/3GPP |
Power supply(V) |
10-30 DC |
Power consumption(W) |
≤0.6 (Idle,12V),≤6 (In motion,12V) |
Adjustment time (Full Range) |
<4Mins |
Adjustment cycles |
>50,000 |
Temperature range (℃) |
-40~65 |
Lightning protection |
3KA(8/20μs) @ Pin5 & Pin3; 5KA(8/20μs) @ Pin1 / Pin6 & Pin7 |
Connectors |
2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Application