Product Name
4 Pol 698-960MHz×2 33°18.2dBi 0°~8° Integrated RCU (Remote Control Unit) Antenna
Product Features
◆ Extended spectrum compliance for 698-960 MHZ
◆ Includes 2 cross polarization arrays(4ports) for low band(698-960MHz)
◆ Uses the new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
◆ Single integrated and field replaceable RCU provide up to 5 RETs
◆ for independent electrical tilt control for each array, Compliant with AISG/3GPP
Technical & Mechanical Specifications
Frequency Range(MHz) |
698~803 |
790~862 |
824~894 |
880~960 |
Polarization |
±45° |
|
||
Gain at mid tilt(dBi) |
17 |
17.3 |
17.8 |
18.2 |
Gain over all tilts(dBi) |
16.9±0.4 |
17.1±0.4 |
17.6±0.4 |
18±0.4 |
Horizontal 3dB beamwidth (°) |
48±6 |
46±6 |
42±5 |
37±3 |
Vertical 3dB beamwidth (°) |
8.2±0.8 |
7.4±0.5 |
7.1±0.5 |
6.7±0.5 |
Front-to-back ratio (dB)Total power,±30° |
>27 |
>28 |
>28 |
>28 |
Cross-polar ratio (dB)at Boresight |
>18 |
>18 |
>17 |
>15 |
Electrical downtilt (°) |
0~8 |
|||
Sidelobe suppression (dB) (First sidelobe above main beam) |
>15 |
>15 |
>15 |
>15 |
VSWR |
<1.5 |
|
||
Isolation: intra-system (dB) |
≥25 |
|
||
Isolation: inter-system (dB) |
≥25 |
|
||
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|
||
Impedance (Ω) |
50 |
|
||
Max. power per input (W) @50°C |
500 |
|
||
Lightning protection |
Dc Ground |
|
||
Connector |
4×4.3-10-Female |
|
Integrated RET Properties
RET model |
MRCU-MQ10P2 |
RET type |
Integrated(Replaceable) |
RET protocol |
AISG 2.0/3GPP |
Power supply(V) |
10-30 DC |
Power consumption(W) |
≤0.6(Idle,12V),≤6(In motion,12V) |
Adjustment time(Full Range) |
<4Mins |
Adjustment cycles |
>50,000 |
Temperature range (℃) |
-40~65 |
Lightning protection |
3KA(8/20μs)@Pin5&Pin3; 5KA(8/20μs)@Pin1/Pin6&Pin7; |
Connectors |
2*8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Application