Product Name
694~960MHz/1710~2690MHz 65°/65° 15.8/18.5dBi 2°~12°/2°~12° Integrated RCU Antenna
Product Features
◆ Includes 2 cross polarization arrays(4ports) for low band(698-960MHz) and 2 cross polarization arrays(4ports) for high band(1710-2690MHz)
◆ Uses the 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
◆ Single integrated and field replaceable RCU provide up to 5 RETs for independent electrical tilt control for each array. Compliant with AISG/3GPP
Technical Specifications
Frequency Range(MHz) |
R1/R2: 694-960 |
|||
|
694-806 |
790-862 |
824-894 |
880-960 |
Polarization |
±45° |
|||
Gain at mid tilt (dBi) |
14.6 |
15.1 |
15.6 |
15.8 |
Gain over all tilts (dBi) |
14.5±0.6 |
15.0±0.6 |
15.4±0.3 |
15.6±0.6 |
Horizontal 3dB beamwidth (°) |
67±5 |
66±4 |
64±4 |
62±4 |
Vertical 3dB beamwidth (°) |
11±0.8 |
10.2±0.7 |
9.5±0.6 |
9±0.7 |
Front-to-back ratio (dB) Total power, ±30° |
>22 |
>23 |
>24 |
>26 |
Cross-polar ratio (dB) (at Boresight) |
>17 |
>20 |
>21 |
>20 |
Electrical downtilt (°) |
2~12 |
|||
Sidelobe suppression (dB) (First sidelobe above main beam) |
>16 |
>17 |
>17 |
>16 |
VSWR |
<1.5 |
|||
Isolation: intra-system (dB) |
≥25 |
|||
Isolation: inter-system (dB) |
R1//R2 ≥ 25 R1, R2//(Y1, Y2) ≥ 25 |
|||
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|||
Impedance (Ω) |
50 |
|||
Max. Power per Input(W)@50℃ |
400 |
Frequency Range(MHz) |
Y1/Y2: 1710-2690 |
|||
|
1710-1920 |
1920-2200 |
2200-2490 |
2490-2690 |
Polarization |
±45° |
|||
Gain at mid tilt (dBi) |
17.1 |
17.5 |
18.0 |
18.5 |
Gain over all tilts (dBi) |
17±0.6 |
17.4±0.6 |
17.8±0.6 |
18.3±0.6 |
Horizontal 3dB beamwidth (°) |
66±6 |
63±6 |
62±6 |
58±6 |
Vertical 3dB beamwidth (°) |
6.9±0.5 |
6.1±0.6 |
5.3±0.6 |
4.8±0.5 |
Front-to-back ratio (dB) Total power, ±30° |
>28 |
>28 |
>29 |
>29 |
Cross-polar ratio (dB) (at Boresight) |
>17 |
>18 |
>17 |
>18 |
Electrical downtilt (°) |
2~12 |
|||
Sidelobe suppression (dB) (First sidelobe above main beam) |
>16 |
>16 |
>16 |
>16 |
VSWR |
<1.5 |
|||
Isolation: intra-system (dB) |
≥25 |
|||
Isolation: inter-system (dB) |
≥28 |
|||
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|||
Impedance (Ω) |
50 |
|||
Max. Power per Input(W)@50℃ |
200 |
Mechanical Specifications
Connector |
8×4.3-10-Female |
Connector Position |
Bottom |
Height×width×depth (mm) |
1999×446×198 |
Packing Size (mm) |
2289×510×250 |
Antenna weight (kg) |
27.8 |
Installation Kit Weight (kg) |
5.4 |
Packing Weight (kg) |
41 |
Wind load (N, at 150km/h) Frontal/Lateral/Rear |
595/190/795 |
Max. Wind Velocity (km/h) |
250 |
Radome Material |
Fiberglass |
Radome Color |
Gray |
Mechanical tilt (°) |
0~10 |
Operating Temperature (°C) |
-50~65 |
Mounting Hardware (mm) |
Ф50~Ф115 |
Integrated RET Properties
RET model |
MRCU-MQ10P2 |
RET type |
Integrated (Replaceable) |
RET protocol |
AISG 2.0 SRET |
Power supply(V) |
10-30 DC |
Power consumption(W) |
≤0.6 (Idle,12V),≤6 (In motion,12V) |
Adjustment time (Full Range) |
<4Mins |
Adjustment cycles |
>50,000 |
Temperature range (℃) |
-40~65 |
Lightning protection |
3KA(8/20μs) @ Pin5 & Pin3; 5KA(8/20μs) @ Pin1 / Pin6 & Pin7 |
Connectors |
2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Application