Product Name
6 Port
Product Features
◆ Extended spectrum compliance for 698-960/1710-2690 MHZ
◆Includes 1 cross polarization array(2ports) for low band(698-960MHz) and 2 cross polarization arrays for high band(1710-2690MHz)
◆ Uses the new 4.3-10 connector, which is 40% smaller than traditional 7/16 DIN connector
◆ Single integrated and field replaceable RCU provide up to 5 RETs
◆ for independent electrical tilt control for each array, Compliant with AISG/3GPP
Technical & Mechanical Specifications
Frequency Range(MHz)
R1/R2: 698-960
698-806
790-862
824-894
880-960
Polarization
±45°
Gain at mid tilt (dBi)
15.0
15.8
16.0
16.1
Gain over all tilts (dBi)
15.3±0.3
15.3±0.4
15.6±0.3
15.9±0.4
Horizontal 3dB beamwidth (°)
68±3
66±3
64±3
63±3
Vertical 3dB beamwidth (°)
11.8±0.8
11.3±0.7
10.6±0.6
10.0±0.6
Front-to-back ratio (dB)
Total power, ±30°
>22
>23
>24
>25
Cross-polar ratio (dB)
(at Boresight)
>25
>25
>26
>26
Electrical downtilt (°)
2~12
Sidelobe suppression (dB) (First sidelobe above main beam)
>19
>19
>20
>20
VSWR
<1.5
Cross Polar Isolation/Intra-Cluster isolation (dB)
≥25
Inter-band Isolation/Inter-Cluster Isolation (dB)
≥ 30
Intermodulation IM3 (2×43dBm carrier)
≤-153dBc
Impedance (Ω)
50
Max. Power per Input(W)@50℃
500
Lightning protection
Dc Ground
|
Frequency Range(MHz) |
1710~2690×2
|
|||
|
1710-1920 |
1920-2200 |
2200-2490 |
2490-2690 |
|
|
Polarization |
±45° |
|||
|
Gain at mid tilt (dBi) |
17.5 |
17.8 |
18.2 |
18.5 |
|
Gain over all tilts (dBi) |
17.0±0.6 |
17.6±0.5 |
18.0±0.5 |
18.3±0.5 |
|
Horizontal 3dB beamwidth (°) |
67±6 |
63±5 |
61±4 |
60±4 |
|
Vertical 3dB beamwidth (°) |
6.8±0.5 |
6.1±0.4 |
5.4±0.3 |
5.0±0.3 |
|
Front-to-back ratio (dB) Total power, ±30° |
>27 |
>26 |
>26 |
>26 |
|
Cross-polar ratio (dB) (at Boresight) |
>17 |
>18 |
>17 |
>16 |
|
Electrical downtilt (°) |
2~12 |
|||
|
Sidelobe suppression (dB) (First sidelobe above main beam) |
>18 |
>17 |
>17 |
>16 |
|
VSWR |
<1.5 |
|||
|
Cross Polar Isolation/Intra-Cluster isolation (dB) |
≥25 |
|||
|
Inter-band Isolation/Inter-Cluster Isolation (dB) |
≥ 30 |
|||
|
Intermodulation IM3 (2×43dBm carrier) |
≤-153dBc |
|||
|
Impedance (Ω) |
50 |
|||
|
Max. Power per Input(W)@50℃ |
250 |
|||
|
Lightning Protection |
DC Ground |
|||
|
Connector |
6×4.3-10-Female |
|
Connector Position |
Bottom |
|
Height×width×depth (mm) |
2080×355×165 |
|
Packing Size (mm) |
2360×420×215 |
|
Antenna weight (kg) |
25.5 |
|
Installation Kit Weight (kg) |
5.5 |
|
Packing Weight (kg) |
37.3 |
|
Wind load (N, at 150km/h) Frontal/Lateral/Rear |
885/278/990 |
|
Max. Wind Velocity (km/h) |
216 |
|
Radome Material |
Fiberglass, UV Resistant |
|
Radome Color |
Gray or colored by customized |
|
Mechanical tilt (°) |
0~10 |
|
Operating Temperature (°C) |
-50~65 |
|
Mounting Hardware (mm) |
Ф50~Ф115 |
Integrated RET Properties
|
RET model |
MCU-MN10P2V01 |
|
RET type |
Integrated (Replaceable) |
|
RET protocol |
AISG 2.0/3GPP |
|
Remote control |
Can be controlled from OMC and BTS/NodeB and external tools |
|
Daisy chain connection solution |
Ready for daisy-chaining/cascade |
|
Power supply(V) |
10-30 DC |
|
Power consumption(W) |
≤0.6 (Idle,12V),≤6 (In motion,12V) |
|
Adjustment time (Full Range) |
＜4Mins |
|
Adjustment cycles |
＞50,000 |
|
Temperature range (℃) |
-40~65 |
|
Lightning protection |
3KA(8/20μs) @ Pin5 & Pin3; 5KA(8/20μs) @ Pin1 / Pin6 & Pin7 |
|
Connectors |
2×8 Pin circle connector according to IEC 60130-9 and AISG. Daisy chain in:Male,Daisy chain out:Female Pin1:12V;Pin3:RS485B;Pin5:RS485A;Pin6:10-30V; Pin7:GND;Pin2&Pin4&Pin8:N/C |
Application
