-
The difference between duplexer and combiner
Jul , 08 2024
1. Different uses: A. Duplexers are generally used at the output and input ends of equipment to isolate signals of different frequency bands. For example: uplink and downlink signals of mobile communications. B. Combiners are generally used for power synthesis in hardware circuits. For example: to get a 40dbm signal, two power amplifiers with an output power of 20dbm can be used for combining. 2. ...
View more
-
What is a repeater and what does it do?
May , 08 2024
Repeater (RP repeater) is a connecting device working on the physical layer. It is suitable for interconnecting two identical networks, and its main function is to extend the network transmission distance by retransmitting or forwarding data signals. Repeaters are network devices that regenerate and restore signals: physical layer devices of the OSI model. In the field of communications, a repeate...
View more
-
Can you use a power splitter as a combiner?
May , 05 2023
RF power combiners and RF splitters are the same items. The same circuits can be used to combine and split RF power, the only difference being that RF power is applied to one port and extracted from other in the case of the RF splitter, and for the RF combiner, power is applied in the opposite direction. Since the 0° power splitter is a reciprocal passive de...
View more
-
DAS & Small Cells: What’s The Difference?
Oct , 28 2022
The radio heads of a distributed antenna system are essentially “dummy” radio heads: these access points don’t provide any signal processing like a small cell antenna system would. Instead, DAS radio heads relay the signal to a cellular base station located at a central hub. Once the signal is relayed to the hub, it’s processed at that central location. Base stations installed at a central hub are...
View more
-
What are 5G frequency bands
Oct , 21 2022
What are 5G frequency bands Like any wireless transmission system, 5G – the fifth generation mobile communication network also require to use frequency spectrum to transmit data. In order to support higher bandwidth, 5G require high frequency range of sub 6 GHz and millimeter waves. What are the radio frequency bands used in 5G communication system? Why 5G requires high frequency spectrum? Convent...
View more
-
Weekly Meeting
Oct , 14 2022
Maniron company holds the following meetings every week: Monday- Quality Meeting Tuesday-Marketing Meeting Wednesday-Production meeting Thursday-Purchasing Meeting Friday-sales meeting Leaders of different departments participated in each meeting. This will help them to communicate effectively and solve difficulties in each link. The combiner filter /low pim power divider/hybrid combiner coupler p...
View more
-
radio frequency combiner
Sep , 12 2022
The circuit breaker is generally used at the transmitter. It combines two or more radio signals sent from different transmitters into an RF device transmitted by the antenna. At the same time, the interaction between signals at different ports is avoided. A circuit breaker typically has two or more input ports and only one output port.Port isolation is an important indicator that describes the cap...
View more
-
RF Dummy Load
Aug , 20 2022
What is dummy load? A dummy load is a device used to simulate an electrical load, usually for testing purposes. In radio a dummy antenna is connected to the output of a radio transmitter and electrically simulates an antenna, to allow the transmitter to be adjusted and tested without radiating radio waves. What does a dummy load consist of? So a dummy load usually consists of a composite resistor,...
View more
-
What's low PIM?what's the Importance of Low-PIM?
Aug , 06 2022
Low PIM means stronger signal,which means higher revenue for happy customers and operators. From a hardware perspective, this means that every connection must be designed to minimize PIM and tested to ensure proper installation. In order to understand the importance of low PIM antennas, Low PIM Combiner and Low PIM Splitter/Coupler in 5G networks, it is critical to understand what PIM refers to. P...
View more
-
Understanding Frequency Filters on Maniron
Jul , 30 2022
We have recently updated the way users can search for products based on their operating frequency. nside Frequency Range: This means that the products that you find will lie within the frequency range that you enter. So if you enter Min = 2400 MHz and Max = 2500 MHz. Then all the products you will get will have a frequency within this range, for example, 2400 - 2500 MHz, 2410 - 2490 MHz, 2440-2450...
View more
